Welcome to theBanner Design Studio

Banner assembly

Your banner arrives as a printed sticker sheet. Here's how to turn it into a banner on its pole.

You'll need: a hobby knife and a cutting mat.

Crossbar banners

This guide covers

  • Small Banner
  • Medium Banner
  • Large Banner
  • Army Banner
  • Army Flag

Step by step

Steps 1–4 of 10

  1. Lay the sheet printed side down.

  2. Cut along the solid line.

  3. Lift out the banner piece.

  4. Crease on the dashed lines, folding away from the print.

  5. Peel off the backing.

  6. Lay the pole's crossbar along the fold line.

  7. Wrap the arms over the crossbar and press down.

  8. Fold the back down and press flat.

  9. Swing the pole down.

  10. Ready to fit to your model.

Wrap banners

This guide covers

  • Vehicle Banner
  • Vehicle Flag

Step by step

Steps 1–4 of 8

  1. Lay the sheet printed side down.

  2. Cut along the solid line.

  3. Lift out the banner piece.

  4. Crease on the dashed line, folding away from the print.

  5. Peel off the backing.

  6. Lay the pole along the fold, cap at the top edge.

  7. Fold over and press the two faces together.

  8. Ready to fit to your vehicle.